## Enhancing quality, lowering risk

The applications used at Van den Herik currently serve to enhance the quality and efficiency for tenders and projects. It not only gives them a competitive advantage when applying to a new project, but it also lowers the risk of making wrong cost estimations. So far, they have successfully used their applications on several projects. For example, the tools for waterway routes and water info analysis are being used for almost all tenders. 

## General and project-specific tools

Besides apps for waterway routes and water info analysis, Van den Herik has one more general tool for determining the type of geotextile that should be used on the soil. Two other project-specific tools are for analyzing sensor data and predicting dredging work.

### Optimizing waterway routes

This application is also referred to as Van den Herik’s Google Maps for waterways. The app is used to determine the fastest route from point A to point B, which boats are allowed to navigate a certain route, and what the most optimal route is when more locations (e.g. 20) should be visited.
“This is a great example of how we automate the boring! Sometimes, we must dredge in 30 locations and dump in 20 possible locations based on soil type and quality. With 600 possible routes, it can become quite complex and laborious to manually determine what the optimal routes are. This tool lets you optimize this process in minutes, saving cost along the way as you use far less fuel.”

![vd Herik (maps).png](https://cms.viktor.ai/uploads/vd_Herik_maps_4ee52232af.png)
*Screenshot of Herik Maps, the application to calculate waterway routes*

</br>

### Water info analysis

Using the Rijkswaterstaat Waterinfo website, Van den Herik retrieves historical data on water levels and currents across the Netherlands. This data is important for the firm, for example, to determine expected workability in certain time windows. However, requesting data from the past 10 years generates enormous .csv files with tens of millions of lines of data. Especially when requesting multiple measuring points. That is why Roga developed an application that connects to Rijkswaterstaat’s API to retrieve these files within minutes, rather than hours, that are ready to be analyzed. The app also filters the data and allows users to create plots and graphs on the course of water levels and currents, which was not possible before using Excel. 

### Geotextile 

Oftentimes underwater constructions need soil protection afterwards to ensure the soil remains as it is. For this, a wide variety of different ‘geotextiles’ and alternatives can be used. Previously, to decide which geotextile was suited the design department at Van den Herik used spreadsheets. However, these can be quite complicated. Especially, for people with less knowledge of the topic. Instead, with the geotextile application, work planners can fill in a list of all environmental factors and the app will provide a suggestion of which geotextile is most suited within five minutes, including a template for a design report that can be submitted to the client.

</br>

### Dredging at Zeesluis IJmuiden

Currently, Van den Herik is working on a large maintenance project at Zeesluis IJmuiden where they are responsible for maintaining the right soil levels for the upcoming 20 years. They are developing an application that will predict how the underwater soil will develop. This is done using bi-weekly measurement data on which machine learning will be applied to discover trends and create links to environmental factors, such as water heights and weather conditions. This way, they can predict when and how often dredgers must be sent to the location. Van Den Herik intends to apply the lessons they learned in using machine learning to assist in dredging operations and, more generally, in optimizing dredging strategies for other projects in the future.

![vd Herik (dredging) resize.png](https://cms.viktor.ai/uploads/vd_Herik_dredging_resize_b7b4fbb69e.png)
*Screenshot from the Dredgin Predictions application used to predict soil developments at Zeesluis IJmuiden*

</br>


## Not a software developer

Despite the great number of tools being developed at Van den Herik, they do not define themselves as a software development organization “And we never will become one”, adds Roga. “However, we can leverage our means to create software that enables us to deliver more quality. Something we had never foreseen to be possible in the first place.” 

> “In conversations with VIKTOR, we appeared to be a great match. Short lines, fast fixes, and feedback gets processed quickly. Everything is based on parameters, which makes creating apps much easier. But the code you write is not linked to the platform and can be repurposed at any time.” – Lloyd Roga, GIS specialist at Van den Herik.

## More engineering tools

Besides their own custom collection of web apps, Van den Herik also uses several pre-existing VIKTOR tools. For example, [GeoTools](https://www.viktor.ai/blog/14/web-application-python-geotechnics): a set of tools that helps save time and make geotechnical data more insightful, the [BRO app](https://demo.viktor.ai/public/bro-app) to assess the soil in combination with their own Geotextile app, the [CPT interpreter](https://demo.viktor.ai/public/cpt-interpreter) to view .gef files in graphs and GIS maps, and the [Document Searcher](https://www.viktor.ai/blog/124/search-engineering-documents-with-viktor-chat-gpt) to find and access any information in (engineering) documents. The last is used on every project; all documents are uploaded so everyone involved can easily search through contract details, fast. 

![vd Herik 2 - resize.png](https://cms.viktor.ai/uploads/vd_Herik_2_resize_f71f7f8259.png)
*Van den Herik ships Charlock and Christophorus dredging at Zeesluis IJmuiden*

</br>

Maritime & Offshore

Civil

Geotechnical

Water

small_vd Herik 1 - resize.png

thumbnail_vd Herik 1 - resize.png

vd Herik 1 - resize.png

Hydraulic engineers at Van den Herik use digital technologies to develop software that empowers them to automate and optimize daily work processes and deliver high-quality projects.

Hydraulic engineering meets digital innovation at Van den Herik

small_why viktor for AEC.png

thumbnail_why viktor for AEC.png

why viktor for AEC.png

Parametric design, BIM intelligence, and AI-driven solutions are revolutionizing the way we design, construct, and manage built environments. Integrating this tech in one cloud-based platform for your whole team ensures a more sustainable, efficient, and optimal workflow.

illustrations-solutions-enable-parametric-design.svg

Transform your Grasshopper, Dynamo, or other custom solutions into dynamic cloud apps. With an intuitive UI, your colleagues can easily use it, while the logic is maintained safely.

large_bimcity.png

medium_bimcity.png

small_bimcity.png

thumbnail_bimcity.png

bimcity.png

Embrace Interoperability to seamlessly integrate various tools, actualize Digital Twins for precise building maintenance, and employ early-stage design optimization for more efficient workflows.

medium_Group.png

small_Group.png

thumbnail_Group.png

Group.png

AI's rapid evolution presents exciting prospects for AEC, spanning building design, software operations, and document management. 

thumbnail_Group 1302democraization of knloedge.png

Group 1302democraization of knloedge.png

We are building a diverse community of academic bodies, industry professionals, students, and tech leaders, who can showcase and exchange their applications. 

small_Group 1299.png

thumbnail_Group 1299.png

Group 1299.png

#### Parametric Design
# 1. Twisting tower and environmental analysis with Grasshopper

Grasshopper serves a dual purpose: shaping architectural designs with precision and conducting vital environmental analyses. This is powered by Ladybug environmental analysis and simulation plugins within Grasshopper. Through our Grasshopper integration, we've simplified running these intricate analyses via an intuitive interface. Our demo app showcases a parametric twisting tower in an urban setting, offering insights through a Direct Sun Hour Analysis, depicting sunlight exposure in various areas over the year.

<iframe height="600px" frameborder="0" src="https://demo.viktor.ai/embed/grasshopper-sunlight-analysis" style="transform: translate(-50%); width: 90vw; max-width: 1028px; margin-left: 50%; box-shadow: rgb(136, 136, 136) 0px 0px 2px 0px;"></iframe>



thumbnail_Group 1303.png

Group 1303.png

#### Parametric Design
# 2.  Parametric design tool for residential buildings

Their parametric design tool empowers Dutch engineering firm J.P. van Eesteren to craft optimal designs for residential towers, maximizing height while minimizing surface area. Visualizations of these parametric models are displayed on a standard map, presenting various elements like apartments, elevators, and staircases. Adjustments, such as dimensions or additional walls, are easily made by modifying input parameters, and the resulting design alterations are immediately reflected on the map. Explore how engineers at J.P. van Eesteren utilize this application to create the perfect design for residential towers, [here](https://vimeo.com/670120716)

<iframe src="https://player.vimeo.com/video/670120716?h=7298f72eb4&title=0&byline=0&portrait=0" width="640" height="360" frameborder="0" allow="autoplay; fullscreen; picture-in-picture" allowfullscreen></iframe>



large_Group 1321 (1).png

medium_Group 1321 (1).png

small_Group 1321 (1).png

thumbnail_Group 1321 (1).png

Group 1321 (1).png

#### BIM Solutions
# 1. Building Structural Design tool

Leading global consulting firm [Arcadis](https://www.arcadis.com/nl-nl?utm_source=google&utm_medium=organic&utm_campaign=gmb&utm_content=Rotterdam) embraces digital transformation, using generative design and automation tools to develop their own Building Structural Design tool on the VIKTOR platform. Automating the structure generation process in a mere 4 seconds. This tool has dramatically accelerated design and analysis, reducing the time by 90 to 100%. Engineers can now explore 100 to 500 design variants compared to the previous 2 to 3, aiding better decisions on costs and sustainability. 

<div style="padding:78.78% 0 0 0;position:relative;"><iframe src="https://player.vimeo.com/video/818358326?badge=0&amp;autopause=0&amp;quality_selector=1&amp;progress_bar=1&amp;player_id=0&amp;app_id=58479" frameborder="0" allow="autoplay; fullscreen; picture-in-picture" style="position:absolute;top:0;left:0;width:100%;height:100%;" title="Arcadis - Building Structural Design tool"></iframe></div><script src="https://player.vimeo.com/api/player.js"></script>

medium_Group 1306archithera2.png

small_Group 1306archithera2.png

thumbnail_Group 1306archithera2.png

Group 1306archithera2.png

#### BIM Solutions

# 2. Precinct Development App

[Archithera](https://archithera.com/) discovers innovative development by automating complex aspects such as parking arrangements and unit mixes. The initial release is tailored for low- to middle-income apartment developments, with a strong focus on surface parking and standalone blocks. [Archithera's solution](https://cloud.viktor.ai/public/precinct-development-app) aims to simplify design tasks, providing vital quantitative insights while enabling designers to effortlessly shape precincts.

<div style="padding:56.25% 0 0 0;position:relative;"><iframe src="https://player.vimeo.com/video/880119946?badge=0&amp;autopause=0&amp;quality_selector=1&amp;player_id=0&amp;app_id=58479" frameborder="0" allow="autoplay; fullscreen; picture-in-picture" style="position:absolute;top:0;left:0;width:100%;height:100%;" title="Precinct Development App_231017"></iframe></div><script src="https://player.vimeo.com/api/player.js"></script>



medium_Group 1311rvt autoamtion.png

small_Group 1311rvt autoamtion.png

thumbnail_Group 1311rvt autoamtion.png

Group 1311rvt autoamtion.png

#### BIM Solutions
# 3. Revit Automation

Easily automate Revit workflows for streamlined data access within a BIM model. With a single click, you can generate Revit sheets. Select and view your Revit views without the need for manual navigation through Revit tabs. Through this automation, teams can channel their energy into innovation and tackling intricate problems:
<div style="padding:56.25% 0 0 0;position:relative;"><iframe src="https://player.vimeo.com/video/875101806?badge=0&amp;autopause=0&amp;quality_selector=1&amp;progress_bar=1&amp;player_id=0&amp;app_id=58479" frameborder="0" allow="autoplay; fullscreen; picture-in-picture" style="position:absolute;top:0;left:0;width:100%;height:100%;" title="00_finalRevitVIdeowithbar"></iframe></div><script src="https://player.vimeo.com/api/player.js"></script>


medium_Group 1309ifc3.png

small_Group 1309ifc3.png

thumbnail_Group 1309ifc3.png

Group 1309ifc3.png

#### BIM Solutions
# 4. IFC Viewer App

IFC files play a vital role in Building Information Modeling (BIM) by facilitating data exchange between various software applications. These files enable sharing and collaboration within the construction and design industry. With the IFC Viewer App, you can easily view your IFC model, allowing you to filter elements and obtain detailed perspectives for effective project management and decision-making.


<iframe height="600px" frameborder="0" src="https://demo.viktor.ai/embed/ifc-viewer" style="transform: translate(-50%); width: 90vw; max-width: 1028px; margin-left: 50%; box-shadow: rgb(136, 136, 136) 0px 0px 2px 0px;"></iframe>



1681552270122.gif

#### BIM Solutions
# 5. Early-stage design optimization with Topologic

Conceptual models, represented by BIM LOD 100, serve as the cornerstone for architects and engineers, facilitating well-informed decision-making. With the incorporation of [Topologic](https://topologic.app/), AEC professionals gain the ability to conduct thorough analyses encompassing cost estimates, energy modeling, and thermal comfort assessment. This not only allows for a more precise identification of areas for improvement during the early stages but also helps in steering clear of costly modifications later on.

large_Group 1335.png

medium_Group 1335.png

small_Group 1335.png

thumbnail_Group 1335.png

Group 1335.png

#### BIM Solutions
# 6. Tekla integration with Grasshopper in real-time

A real-time integration between Tekla and Grasshopper brings together the speed and capabilities of Grasshopper, a powerful algorithmic modeling tool, with Tekla's specialized features in structural steel detailing, analysis, fabrication reports, and material lists. This integration triggers a flow of information and design alterations between the two platforms, enhancing efficiency and accuracy in structural engineering projects. Designers can utilize Grasshopper's flexibility and rapid prototyping features, while leveraging Tekla's expertise in precise structural detailing and reporting, resulting in an optimized and streamlined workflow in structural design and construction.

<div style="padding:51.75% 0 0 0;position:relative;"><iframe src="https://player.vimeo.com/video/875183674?badge=0&amp;autopause=0&amp;quality_selector=1&amp;progress_bar=1&amp;player_id=0&amp;app_id=58479" frameborder="0" allow="autoplay; fullscreen; picture-in-picture" style="position:absolute;top:0;left:0;width:100%;height:100%;" title="videowhyviktor"></iframe></div><script src="https://player.vimeo.com/api/player.js"></script>


large_Group 105 (1).png

medium_Group 105 (1).png

small_Group 105 (1).png

thumbnail_Group 105 (1).png

Group 105 (1).png

#### BIM Solutions
# 7. Digital Twins

Digital twin technology can help with saving all kinds of resources, such as time and costs all the while making facility management much better. Here's a real-life example: The [Binnenhaven Bridge](https://www.viktor.ai/customer-cases/9/digital-twin-python-bridge) in Rotterdam faced a challenge during hot days when the metal would swell, causing issues in opening or closing the bridge. To tackle this, the city employed a sensor-based early warning system, strategically placing 52 sensors to monitor the temperature and expansion of the bridge. This data, available in real-time within a VIKTOR app, enables precise predictions and proactive cooling, ensuring the bridge operates smoothly even during high temperatures.

large_Group 1322.png

medium_Group 1322.png

small_Group 1322.png

thumbnail_Group 1322.png

Group 1322.png

#### Artificial Intelligence
# 1. Document searcher

AEC professionals often grapple with vast repositories of text documents, from tenders and contracts to technical reports and regulations. Manually searching documents is time-consuming, especially for essential details. The solution: integrating ChatGPT and its API into your workflow. The [Document Searcher](https://demo.viktor.ai/public/document-searcher) lets users easily find the information they are looking for by simply asking the app their question!

<iframe src="https://player.vimeo.com/video/875185461?h=9f1a835a53" width="640" height="564" frameborder="0" allow="autoplay; fullscreen" allowfullscreen></iframe>

ezgif.com-resize (8).gif

#### Artificial Intelligence
# 2. Chatbot: design by text

Tasks often involve intricate workflows across various programs. Whenever a change occurs, this calls for various parameter adjustments. With the Chatbot, users can streamline these diverse workflows into one unified app. The latest development involves user-friendly text input. This offers an alternative to manual parameter tweaking using sliders and buttons, making the process more intuitive based on text-only input!


ezgif.com-resize (10).gif

#### Democratization of knowledge
# Apps Gallery

At VIKTOR, we're dedicated to fostering innovation through a culture of knowledge democratization. We facilitate this collective effort by encouraging you to share your innovative applications. [The Apps Gallery](https://www.viktor.ai/apps-gallery/category/all/discipline/all/integration/all/1) is the place for all users, from academic bodies to industry professionals, students, and tech leaders, to showcase and share applications. This collaborative space allows for the exchange of ideas, expertise, and solutions, ultimately enriching the AEC landscape.




Our experts can help you find the right opportunities, set realistic goals, and meet deadlines.

Effortlessly integrate with industry-leading software, the Python Ecosystem, and modern development tools.

Why VIKTOR for AEC

BIM, parametric design, AI, and democratiziation of knowledge through a cloud-based platform.

Why VIKTOR for Architecture, Engineering, and Construction

All cutting-edge technologies in one platform with high interoperability 

**Cloud-based parametric design tools** foster real-time logic sharing among diverse teams. **BIM solutions** streamline design and construction processes, enabling interoperability across software without any data loss. The integration of **AI technologies** can be used to automate repetitive tasks, empowering you to use your expertise to solve challenging issues. Combining these technologies into one platform contributes to a culture of **knowledge democratization** through shared, innovative applications.


thumbnail_maxime portrait.jpg

maxime portrait.jpg


## InfoWiz: 3x AI

McDermott's projects always involve large amounts of data and text. Infowiz is intended to help find and access relevant information more quickly and easily. 

InfoWiz is comprised of three different modules, each with a specific function and purpose. Behind the scenes, the solution is powered by the Microsoft Azure AI LLM technology, ensuring the data remains secure and private.


### Module 1: Interactive Document Query

Maximizing ‘AI as a self-service’, this module enables engineers to access and analyze any documents with ease. Users can upload documents and ask question in natural language: such as “Extract weight and dimensions of the equipment”, “List the applicable standards”, etc. The system will provide relevant answers based on the content of the documents. This module can be used to summarize, extract, enrich and transform documents as needed. Users can quickly get the most out of their documents and gain valuable insights. In addition, 
The module offers automatic translation from and to specific languages to best serve international projects.  

### Module 2: Corporate Documents

In this module, a selection of corporate documents has been preloaded in the application. This includes documents from McDermott’s global engineering library, such as standards, best practices, manuals, and guides that are commonly used for project execution. Queries retrieve accurate information from the database, ensuring answers are based on McDermott trusted sources. 
For instance, "What is the best type of cable to use to connect operating buildings?". The application responds: "[...]Redundant fiber-optic cables [...]" and provides a reference to the document where the answer come from.

The application uses semantic search, which allows users to run queries in their own words, without having to match exactly the original text. This is different from a traditional search engine that depends on keywords and phrases. 

McDermott's engineers save time finding the information they need faster and can deliver more value to customers.

### Module 3: Virtual Assistant

If you ever used ChatGPT before, you know how this works. The main difference here is that the data processed remains safe and private, with all interactions kept within McDermott. 

Users can engage in human-like interactions with the virtual assistant. This can be used for a large variety of tasks such as parsing engineering standards, brainstorming new ideas or fixing a spreadsheet report. Answers to these questions are not based on internal data from McDermott but come from the LLM itself. In all modules, data is never stored, however users have the option to export the questions and answers to their device. 

## Efficiency across disciplines

Behind every application is a brilliant idea. As an Information and Data Management Specialist with an interest in AI, Maxime Moulin wanted to use the LLM technology to improve processes and break down the silos between different engineering disciplines. Fast forward six months and the idea turned into an application that is currently being used by a select group of digital pioneers at McDermott (read: project managers, department managers, engineers). Moulin: “This is the essence of digital transformation: leverage technology to do things differently and be more efficient”. 

## Partnership

Moulin praises “the innovative AI team at McDermott and the power of the VIKTOR platform that makes the InfoWiz development possible.” This is proven by the fact that there are already quite a few AI applications developed at McDermott, such as the ReCo tool for patterns recognition, several deep learning and prediction tools, and now applications that use natural language abilities and generative AI, like InfoWiz. 
“VIKTOR is more than just a platform for agile product development, they are also a partner to McDermott. They support us with our technological needs, and we contribute to their service development. On top of that, we received excellent support and have been brainstorming together, exchanging ideas, and even sharing code. One more key aspect is that VIKTOR is a web-based platform, allowing McDermott’s users to access it easily from our offices globally, whether in Netherlands, India, Malaysia, or the USA.”



</br> 

## What’s next? 

After the initial launch, requests to further customize InfoWiz started coming in fast, with myriad of potential use cases. For now, the AI team is planning to add more documents from the corporate management system to the knowledge base. Next, they will investigate integrating with other McDermott’s applications, so that users can access project-specific information.

## About VIKTOR
You've just read one of the many use cases of the VIKTOR platform. I hope you found it an interesting read! However, there is much more to the VIKTOR platform than only this specific case. Let me tell you more about us:

VIKTOR is a low-code application development platform that empowers engineers and other domain experts to revolutionize their workflow by effortlessly creating user-friendly web applications with nothing more than Python. The VIKTOR platform consists of the following pillars:

1. The VIKTOR SDK: Application development is time-consuming and not the core business of many engineers, but web applications are truly an amazing asset. With the VIKTOR SDK, you can build your own Python-based web apps. The SDK takes care of the back-end, front-end, and hosting, so you can easily transform your Python scripts into any web app and start automating the boring.

2. The Workers: VIKTOR allows for seamless integration with other third-party software packages, such as Revit, Dynamo, ETABS, Grasshopper, and many more. The VIKTOR workers allow you to easily connect your app to these software packages by pushing and pulling data to and from them, eliminating the boring manual work. This way, you can create a whole new level of interoperability, all within a single app, making your VIKTOR app the single point of truth.

3. The Company environment: VIKTOR comes with a company environment, giving you the ability to provide access to users within and outside your company to use your apps. The company environment is a hub where all developed apps are stored and can be used, much like a library. To top that, end-users do not need to install any third-party tools that integrate with a VIKTOR app to be able to use them. The user management system lets you fine-tune user rights within applications (which have their own user management and database), while also providing valuable insights into app usage. This enables you to measure the adoption of the digital tools developed.

You can build any application you can imagine on the VIKTOR platform. Automating the boring tasks with ease, so engineers can fully focus on their engineering work again.

If this sounds interesting to you or your company, let's have a chat, you can reach me via: swolters@viktor.ai



AI assistent helps engineers manage data

the InfoWiz app uses LLMs and is designed to save tim and effort on engineering projects!

McDermott’s AI assistant helps engineers find and access information quickly

small_MCDermott article thumbnail.png

thumbnail_MCDermott article thumbnail.png

Information and Data Management Specialist at McDermott

Maxime Moulin

thumbnail_igor portrait.jpg

igor portrait.jpg

## Giant potential

The idea to create the Building Structural Design tool came to life about one and a half years ago following Arcadis’ strategy to excel in the design of industrial buildings. Due to the increased request for constructions such as gigafactories, warehouses, and data centers quickly being erected all around us, Arcadis saw giant potential in the development of an application for the automation of structural building designs. 

<div style="padding:78.78% 0 0 0;position:relative;"><iframe src="https://player.vimeo.com/video/818358326?h=91e992e7ad&amp;badge=0&amp;autopause=0&amp;player_id=0&amp;app_id=58479" frameborder="0" allow="autoplay; fullscreen; picture-in-picture" allowfullscreen style="position:absolute;top:0;left:0;width:100%;height:100%;" title="ezgif.com-gif-to-mp4 (2)"></iframe></div><script src="https://player.vimeo.com/api/player.js"></script>

</br>

## Go global!

Since technologies in different regions are essentially not much different from one another, and the knowledge about structural engineering is also similar, Arcadis decided to approach this development on a global scale. Thus, an application was created that can be used by all Arcadis regions worldwide. “Thanks to our active group of stakeholders and end users all over the world, we have been able to make the application accessible to everyone working in the realm of structural engineering within Arcadis,” says Michael van Telgen, Design Automation Specialist at Arcadis. “Structural engineers and consultants in different Arcadis regions are picking up the tooling and applying it to their work.”

## Preliminary and conceptual design

Built specifically for structural engineers and consultants, the Building Structural Design tool is intended for usage in the conceptual and preliminary stages of a design and focuses mainly on aspects like cost and sustainability. The purpose is to help engineers quickly create a design using input from the architect about a building’s dimensions. According to Igor Pecanac, Specialist Engineer at Arcadis: “Most of our work lies within the conceptual and preliminary stages of a design, so those are the areas we want to focus on. These are also the areas where most commercial tooling is lacking.” 

In the app, engineers can enter basic information about the building dimensions and sustainability requirements and try different grid options to automatically calculate required element sizes for, for example, columns, beams, and floors. Depending on their region, engineers can choose the correct design code before proceeding to determine loads and choose material types. Pecanac adds: “The app automatically generates the structure for you. This would normally be done by a structural engineer themselves. Instead, the app does this in just 4 seconds.”

![BSD tool frame design.png](https://cms.viktor.ai/uploads/BSD_tool_frame_design_c6dff359cc.png)

*Building Structural Design tool: Frame design*

</br>

![BSD tool elements design.png](https://cms.viktor.ai/uploads/BSD_tool_elements_design_841c64990d.png)

*Building Structural Design tool: Elements design*

</br>

## Sustainability and resources

 Using the tool, engineers and consultants can now design buildings and analyze them in 90 to 100% less time than before. This has an enormous impact on productivity, as engineers can now look at anywhere from 100 to 500 variants of a design whereas this number was previously only 2 to 3. The tool also allows engineers to make better and more well-informed decisions regarding costs and sustainability. This allows for more informed discussions with clients about their different options, helping them make balanced choices that lead to the most optimal cost-to-CO2 emission ratio. 

“Clients are requesting more information in less time, and engineers need to take more factors into account in the design process,” says Pecanac, “which is only possible if you have tools like this to your avail. The impact on productivity is simply enormous.”

![BSD tool calculation report.png](https://cms.viktor.ai/uploads/BSD_tool_calculation_report_069eafb274.png)

*Building Structural Design tool: Calculation report*

</br>

## Tool suite

The Building Structural Design tool is actually not one application, but a suite of multiple different apps on the VIKTOR platform, such as for the calculation of foundations, floors, and wind loads. The Building Structural Design tool is at the heart of it all with a focus on creating a general building design. The other apps can be used to further expand upon and specify information regarding the different elements inside a building. “We purposely separated these design choices from the main application,” says Pecanac. “We don’t want to overwhelm people by presenting 100 options to use at once.”

## The future of (structural) engineering

The Building Structural Design tool is just one of many developments Arcadis has been working on on the VIKTOR platform. In 2021, they started the development of their first app for the design of underwater concrete floors. By now, this tool has been used on several large projects, such as the design of the underpass and aqueduct in the N247 highway in the Netherlands. 
It is clear that automation software can be used in all kinds of engineering disciplines to increase productivity, and specifically in the field of structural engineering. “If you don’t do anything with automation in this area, you risk losing to your competitors,” says van Telgen. “New technologies like VIKTOR help democratize, standardize, and reuse a lot of knowledge to increase efficiency, productivity, and overall quality of work.”

## About VIKTOR

You've just read one of the many use cases of the VIKTOR platform. I hope you found it an interesting read! However, there is much more to the VIKTOR platform than only this specific case. Let me tell you more about us:

VIKTOR is a low-code application development platform that empowers engineers and other domain experts to revolutionize their workflow by effortlessly creating user-friendly web applications with nothing more than Python. The VIKTOR platform consists of the following pillars:

1. The VIKTOR SDK: Application development is time-consuming and not the core business of many engineers, but web applications are truly an amazing asset. With the VIKTOR SDK, you can build your own Python-based web apps. The SDK takes care of the back-end, front-end, and hosting, so you can easily transform your Python scripts into any web app and start automating the boring.
 
2. The Workers: VIKTOR allows for seamless integration with other third-party software packages, such as Revit, Dynamo, ETABS, Grasshopper, and many more. The VIKTOR workers allow you to easily connect your app to these software packages by pushing and pulling data to and from them, eliminating the boring manual work. This way, you can create a whole new level of interoperability, all within a single app, making your VIKTOR app the single point of truth.
 
3. The Company environment: VIKTOR comes with a company environment, giving you the ability to provide access to users within and outside your company to use your apps. The company environment is a hub where all developed apps are stored and can be used, much like a library. To top that, end-users do not need to install any third-party tools that integrate with a VIKTOR app to be able to use them. The user management system lets you fine-tune user rights within applications (which have their own user management and database), while also providing valuable insights into app usage. This enables you to measure the adoption of the digital tools developed.

You can build any application you can imagine on the VIKTOR platform. Automating the boring tasks with ease, so engineers can fully focus on their engineering work again.
 
If this sounds interesting to you or your company, let's have a chat, you can reach me via: swolters@viktor.ai





building structural design tool thumbnail.png

Leading design, engineering, and management consulting firm Arcadis develops its own structural engineering tools to increase productivity and sustainability and save resources. Read more on VIKTOR.ai!

How Arcadis develops next gen structural engineering tools with VIKTOR

Arcadis develops next gen structural engineering tools with VIKTOR

small_building structural design tool thumbnail.png

thumbnail_building structural design tool thumbnail.png

Specialist Engineer at Arcadis

Igor Pecanac

thumbnail_marina portrait.jpg

marina portrait.jpg

## Global Design Automation

With approximately 15 billion dollars in annual revenue and a talent force of over 50,000, professional services firm [Jacobs](https://www.jacobs.com/) provides engineering, technical, professional, and construction services to clients on a global scale. Their vision is to create a smarter, more connected, and more sustainable world by challenging today and reinventing tomorrow. In line with this vision, they set up the Global Design Automation Program with the purpose of enhancing engineering processes and eliminating mundane and highly repetitive tasks. As part of the Global Design Automation Program, Global Technology Leader Marina Villanueva and colleagues started looking for technologies to maximize and increase automation. Villanueva: “That is how we found VIKTOR.”

## Web-based applications.

After discovering VIKTOR – a platform to build and share engineering applications – in early 2023, Jacobs started the development of several web apps. Currently, three of these are being used and several more are finishing up development. Examples are tools for automated highway barrier design, steel pipe connection design, a Rayleigh Wave calculator, and a Return on Investment (ROI)  calculator. Whereas most tools are designed by developers and engineers at Jacobs, the ROI calculator was designed and developed by Villanueva herself. The tool can be used to calculate the ROI  of (potential) VIKTOR apps: “Ideas for applications always require funding. This app helps developers or idea owners to get that funding, as decision-makers need to understand what the ultimate return on investment is going to be.”

![ROI app.png](https://cms.viktor.ai/uploads/ROI_app_e3380da80e.png)
*The ROI calculator app on the VIKTOR platform*

Besides calculating the return on investment for existing tools, the ROI calculator has also been used to predict ROI times for other potential ideas that will not necessarily be turned into applications. Villanueva: “It’s good to know the result of your efforts up front. If there is no return on investment, or if the ROI is too far ahead, we can focus on something else instead.” 

</br>

<iframe height="600px" frameborder="0" src="https://jacobs.eu2.viktor.ai/embed/rayleigh-wave-forward-modelling" style="
    transform: translate(-50%);
    width: 90vw;
    max-width: 1028px;
    margin-left: 50%;
    box-shadow: 0px 0 2px 0 #888;
    "></iframe>

*The Rayleigh Wave calculator. Click on 'pop out' to use the app full screen.* 

</br>

## Capturing logic

Even though Villanueva, according to herself, is no professional software developer, she does have some Python skills: “I found it very easy and fun to create my own application on the VIKTOR platform. The biggest advantage to me was that I did not have to invest much time designing the user interface myself.” Just like many engineers, Villanueva was more interested in developing the logic behind it all. “Because I could publish new versions of my application very quickly, I could release something valuable within a short amount of time and continue to polish and improve after.” 

> “The VIKTOR platform is very accessible to engineers from a developer point-of-view. There is no need to know any HTML, CS, or JavaScript. Only Python. All complexity that typically goes together with developing web applications is removed. The user interface is very intuitive and easy to use, which helps a lot with the adoption.” – Marina Villanueva, Global Technology Leader at Jacobs

## Automation on all projects

Jacobs’ rollout of VIKTOR applications started in January 2023 in the Europe region. As a global organization, Jacobs delivers engineering projects all over the world. That is why Jacobs’ strategy is to provide usage across all other regions. Villanueva: “We want to maximize our investment by enabling people from all regions to use the tools we are developing.” 
Currently, Villanueva is working with organizational change management experts on an engagement plan to increase adoption and maximize the reuse of apps. One initiative is to merge the separate development environments from the UK and Europe and implement ‘multi-region access’ to ensure people from one region can access applications made by the other. In 2 to 3 years time, Villanueva expects that engineers at Jacobs will use applications to automate processes on all projects: “My vision is that automation to deliver technical work becomes the norm, rather than the exception.”

## About VIKTOR
You've just read one of the many use cases of the VIKTOR platform. I hope you found it an interesting read! However, there is much more to the VIKTOR platform than only this specific case. Let me tell you more about us:

VIKTOR is a low-code application development platform that empowers engineers and other domain experts to revolutionize their workflow by effortlessly creating user-friendly web applications with nothing more than Python. The VIKTOR platform consists of the following pillars:

1. The VIKTOR SDK: Application development is time-consuming and not the core business of many engineers, but web applications are truly an amazing asset. With the VIKTOR SDK, you can build your own Python-based web apps. The SDK takes care of the back-end, front-end, and hosting, so you can easily transform your Python scripts into any web app and start automating the boring.

2. The Workers: VIKTOR allows for seamless integration with other third-party software packages, such as Revit, Dynamo, ETABS, Grasshopper, and many more. The VIKTOR workers allow you to easily connect your app to these software packages by pushing and pulling data to and from them, eliminating the boring manual work. This way, you can create a whole new level of interoperability, all within a single app, making your VIKTOR app the single point of truth.

3. The Company environment: VIKTOR comes with a company environment, giving you the ability to provide access to users within and outside your company to use your apps. The company environment is a hub where all developed apps are stored and can be used, much like a library. To top that, end-users do not need to install any third-party tools that integrate with a VIKTOR app to be able to use them. The user management system lets you fine-tune user rights within applications (which have their own user management and database), while also providing valuable insights into app usage. This enables you to measure the adoption of the digital tools developed.

You can build any application you can imagine on the VIKTOR platform. Automating the boring tasks with ease, so engineers can fully focus on their engineering work again.

If this sounds interesting to you or your company, let's have a chat, you can reach me via: swolters@viktor.ai


Jacobs Automate Engineering Processes.png

Engineers at Jacobs experience a growing need to automate workflows, for example with VIKTOR. 

Jacobs automates engineering processes with VIKTOR

small_Jacobs Automate Engineering Processes.png

thumbnail_Jacobs Automate Engineering Processes.png

Global Technology Lead at Jacobs

Marina Villanueva Díaz

## Increasing design efficiency

However, providing an adjusted design after each road or artwork change costs a lot of work. About two years ago, WTOP decided to investigate where most of the time was spent in the process of designing, and where this could be done more efficiently. This showed that in a number of these processes, many hours were spent on repetitive and unimaginative work. In addition, it turned out that arranging and creating a smooth line with these barriers is a complicated process and time-consuming. Jaap van de Werfhorst, owner of WTOP infra, decided that this process should be automated.

## Automating the process

The work of manually placing elements along the road based on a maximum angular rotation and, if it turns out not to fit, to start this process all over again, had to find an alternative solution. WTOP infrastructure was in contact with VIKTOR to see how various processes could be better linked to each other, and the above mentioned problem was discussed with the question wheher using VIKTOR would be fruitful. At VIKTOR they came up with the proposal to do this with a self-written algorithm. Van de Werfhorst: “Initially, there was still uncertainty whether the algorithm could also handle complex projects. If it could carry out the 80% easiest projects, it would not be of much use to us, because it is precisely in the difficult 20% where the most profit lies.”

## An application for complex projects

“After several brainstorming sessions, we were confident that the application could also handle complex projects,” explains Van de Werfhorst. In the application you can define your grid, the bounds of the design, the horizontal and vertical alignment, the maximum angular rotations between the elements, variables related to defining the angular rotations, other constraints such as cables and pipes, artworks, etc. and where you wants to apply your fitting elements. All these parts can be entered in both x, y and z directions. Based on all this input, the algorithm determines the optimal line of the noise barrier. In a visual representation, the application shows by means of colors whether the barrier can be made with the specified conditions. If it turns out that this does not work, the application indicates where the problems are, so that the conditions can be adjusted at those specific locations if desired. This can be done by increasing the angular rotation between the elements, which may then create elements that meet the requirements or by giving the barrier some more space by adjusting the bounds of the design. The great thing is that the program examines and calculates hundreds of thousands of possibilities within a few minutes. The application also generates a list of coordinates in x, y and z direction of the design. This list of coordinates is imported into Excel by WTOP infra, after which all elements that meet the requirements are generated by dynamo and placed in a 3D model. In addition, dynamo in combination with excel creates a quantity list with the main dimensions per element. As a result, the consequences of design choices are immediately visible in both a 3D model and quantities.

## What can be gained? 

Due to this extensive automation, instead of spending much work on unimaginative tasks, the time can now be spent on solving details and interfaces. The advantage is that various choices can be made clear at a detailed level quickly in the tender phase, which also makes it easier to estimate the risks. Since all parts and placements are generated from a single coordinate list, including the production drawings and layout drawings, it is also possible to act quickly during the design process and execution, and failure costs due to changes can be minimized.

Van de Werfhorst: “The step that we have taken together with VIKTOR ensures that we are at the beginning of a development that can be carried out much further by linking this to schedules, cost estimates, etc.” The application and links made with analysis- and drawing programs are useful not only for noise barriers, but also for everything in which prefabricated (3D) elements are placed on or along an alignment, which is currently also being implemented.

large_Noise barrier.jpg

medium_Noise barrier.jpg

small_Noise barrier.jpg

thumbnail_Noise barrier.jpg

Customer_case_algorithm_noise_barrier_design_1

For complex projects, it is important to deliver designs in complete 3D, so that they can be incorporated into BIM. But this process takes a lot of time. 

An algorithm that makes noise barrier design much faster

## Custom truss constructions

The truss constructions at large music stages become bigger and more complex. Festivals want to have their own unique stage, with a custom truss construction. These constructions are very expensive if they have to be custom made, or you have to deal with a limited set of standard shapes with existing products. 

![Truss construction design in the analyze one](/uploads/Truss_constructions_in_the_analyze_one_3bfe986172.jpg)


### Software and building blocks

FrameFlux is offering an affordable option for creating your custom construction. Yufe Wong, cofounder of Frameflux: “We invented an adjustable, reusable building block, with which you can create any shape structure you want, with the same level of form-freedom as a snake!” Besides the physical product they also developed in-house [parametric design](https://www.viktor.ai/blog/46/parametric-design-cloud-engineering-construction) and analysis software tools to rapidly design these custom shapes and analyse them. “You can perform a structural feasibility check in seconds on an unlimited set of forms, including the conventional shapes.” This removes a barrier to the use of the truss, since it would be difficult to engineer and design some of the complex structural shapes that become feasible.

![Truss construction design](/uploads/Truss_construction_design_56c25ff136.jpg)


## Hitting the market

After demonstrating the software tools to customers and receiving a lot of enthusiasm, FrameFlux wanted to take the next step. After an elaborate vendor selection, FrameFlux partnered with VIKTOR for their experience and integration with Grasshopper and Python, along with a user-friendly interface to suit the needs. Since March 2020, the two companies have been collaborating to deliver this software product, named Antalyze One. This application allows integration with SCAD Re-Event, a popular 3D CAD program for the Dutch event industry. Now a super-fast workflow for design of standard truss beams is realized: users can create a design in SCAD Re-Event, export the data to the web-based VIKTOR platform, and then instantly run a Grasshopper-powered structural feasibility check. It is also possible to make changes in VIKTOR and re-import these back into SCAD Re-Event. VIKTOR’s fine grain data management systems, for user information and technical data, allow for such automation when coupled with Grasshopper. In future, integrations with other CAD programs will be possible.

![Data mangement systems for truss constructions](/uploads/Data_management_system_8043c8a027.png)


## A user-friendly interface

“With VIKTOR we’ve got a friendly user interface and a good integration with our existing Grasshopper model, instead of starting over again.” In the web-application an event designer can also upload their design and other relevant inputs whenever and wherever they want. As before, this information is sent to the Grasshopper model in which the analysis is done. The results of this analyses are sent back to the web-application and visualized for the event designer.

![Visualizations of truss construction designs](/uploads/Truss_construction_visualizations_deb241cb3c.jpg)


## The 'Antalyze Two'?
The decision to automate this process is an easy one according to Yufe “A designer can now create, develop and get a structural feasibility check on their preliminary designs of loaded straight beams without hours of spreadsheet work or consultation.” There are already plans for a potential ‘Antalyze Two’, which will be able to process a much greater variety of structural shapes. “Especially for custom-made constructions it could take weeks before a design was analysed by a consultant. With our software and the web-application made on the VIKTOR platform, a check could be run on squares, circles and snake-like structures… in only a matter of seconds!”

Interested in developing web-applications as well? Check out our [parametric design solutions](https://www.viktor.ai/parametric-design-software)!

large_Truss construction design.jpg

medium_Truss construction design.jpg

small_Truss construction design.jpg

thumbnail_Truss construction design.jpg

Customer_case_truss_construction_design_4

It is now possible to analyse structures with a user-friendly web application quicker than ever before!

Analyse any truss construction design within seconds

## Designing a sustainable future

Stefan Schoenmakers, design leader Civil Realisation Substructure of the Theemsweg route at Wagemaker explains that the Calandbrug will have reached its technical lifespan in 10 years. It was built around 1970 and provides road and freight traffic. By removing freight traffic, the lifespan is extended and at the same time the with new rail viaduct, the train traffic does not experience interference of opening and closing the bridge for shipping. The new route is designed for the next 100 years. “We have to look and think far ahead, because mobility issues may change over this period of time. This makes it a very interesting project”.

## Many parts to a mega project

Wagemaker designs almost all the foundations for this project. Wagemaker is part of SaVe, a construction consortium consisting of Besix, Dura Vermeer and Mobilis that is responsible for the design and realisation. “We work with a design team of 12 people at Wagemaker, where my job as design manager is to ensure that our product, drawings and calculations are finished on time and distributed within the organisation of SaVe. We look at implementation, manufacturability, optimisations, alignments with the road design team, with provisions for lighting, making certain parts prefab, and much more. Our constructors and modellers work on all these things simultaneously”, says Schoenmakers. A mega project.

## Complexity and diversity

Not only the size is a challenge; the route is 4 km in length, but also the complexity. “You come across different types of soil situations. In some places the foundation is in water, in other places you have to build across an existing lock, or you have to deal with a very poor soil structure, or a soil structure in which inserting piles is a challenge. It is very diverse.”, says Schoenmakers. In addition, we are dealing with the fact that almost every location is very specific regarding the number of cables and pipes in the ground. Wagemaker looked for an effective way of analysing the foundation supports. “In principle we have 100 support points, some of which are identical, but the situation is different due to the soil composition. Initially, we wanted to make a certain design choice based on a comparison between support points that are similar and then calculate only one”, which is not optimal. Due to previous collaboration on another project, they ended up at VIKTOR. “We worked on the TenneT project, of Heijmans. You were involved in that project as well, and we then saw what was possible and we also want to stimulate development. So we said right away, we are going to do it together with VIKTOR!”.

## The role of the VIKTOR platform

With VIKTOR, the substructure of the route has been parametrically designed and calculated. This was done, among other things, by means of integrations with geotechnical and structural calculation software such as the finite element program SCIA. Schoenmakers: “By using your tool, we were able to generate parametric models with corresponding load cases for all supports and foundations. This made it easy to analyse internal force distributions, pile reactions and other calculation results. We ultimately opted for 5 to 6 basic foundations. They were all defined in the database of the tool and we could attach foundation characteristics, such as soil properties. Actually, this is in reverse order to the normal process, enabling us to much better determine where optimisations are present”.

Using the tool resulted in making the design process and reporting more efficient. The VIKTOR platform has been very valuable not only in the field of calculations, but also towards the client and testing authorities: “This has enabled us to demonstrate that we have been able to design and analyse all support points properly,” says Schoenmakers.

## Wagemaker focuses on digitisation

Wagemaker clearly focuses on the digitisation of engineering; A few years ago, a Virtual Design department was established to keep up with the developments. Of the 8 people there are 2 dedicated programmers employed. “If we can save time on projects by doing things [smarter](https://www.viktor.ai/blog/40/artificial-intelligence-machine-learning-engineering-construction), we have more time for complex projects where we cannot automate or parametrise anything. You became an engineer for the complex thinking involved, thereby empowering people. You don’t want to do the same thing 10 times. It may be nice the first time, and second time as well, but then it stops. It is very time consuming and if you have to do the same thing 10 times over, the chance of errors will also increase”. VIKTOR has provided a clear solution for this. Wagemaker recently participated in a few technical sessions at VIKTOR, in which three engineers are now learning to develop their own tool in the VIKTOR platform. Not participating in this development is not an option for Wagemaker. “We try to stay ahead, because the moment you can do something that someone else cannot do, it strengthens our market position.”

small_Theemsweg route.png

thumbnail_Theemsweg route.png

Customer_case_parametric_models_theemsweg_route_1

The Theemsweg route is a new railway viaduct, which allows uninterrupted train traffic on the first part of the Betuwelijn, without having to stop for ships. A challenging project for VIKTOR and Wagemaker, who is responsible for the engineering of the substructure of the route!

Parametric models to design the structure of the Theemsweg route

## No replacement, but renovation!

The developed system makes it possible to place a new pipe in the old pipe without excavating the street. Thanks to the coupling supplied by CODURE, the system can be directly connected to the rest of the network. Each coupling is specifically designed and made for the project. With the help of VIKTOR, an application has been developed that, in addition to the dimensions and structural calculations, also generates the code to control the CNC machines and keeps track of the quality control.

## Easy coupling with CODURE

Anande Bergman, Chief Technology Officer at CODURE, explains: “CODURE has developed a patented coupling specifically to repair pressure lines using Cured-in-Place-Pipes (CIPP).” CIPP is a method to repair existing underground pipes without having to excavate the whole street: a new pipe within the old pipe. A fiberglass sleeve is placed and cured within the old pipe that has a coupling at each end. The coupling has a special inner surface that ensures adhesion to the sleeve during curing, so the sleeve and coupling form a whole. Thanks to the coupling piece, the CIPP sleeves can easily be connected to the rest of the network.

## Different coupling designs

Unfortunately, existing pipelines are not the same everywhere and the required couplings are often unique. We are talking about old pipes with varying sizes that do not correspond to the current standards. The pressure on the pipe also differs per situation. As a result, every project is slightly different and a new coupling must be designed every time. Bergman: “It is a time-consuming task to design a coupling piece every time in a traditional way. Due to the complexity of the product, we always have to do this, even to just create a simple quotation. ”

## An automated application to the rescue 

That is why an application has been created together with VIKTOR to be able to perform those calculations automatically. “Before using VIKTOR, one of our engineers had to do a strength calculation for each coupling design. We did this with FEM, because thick-walled glass fiber products are complex to calculate. That took a few hours per design”, says Bergman. With the help of the application, a complete design can now be made quickly and easily. This not only saves time, but also money. “Even small orders are now commercially attractive.”


![codure.PNG](https://cms.viktor.ai/uploads/codure_1cb13314b4.PNG)



## The possibilities of centralized and automated data

“The application can do much more,” says Bergman. Quotes, drawings and data sheets with all relevant information can be generated for each coupling design. This is not done via manual calculations or individual Excel models, but rather all data is collected and generated centrally and automatically in the application. Due to the central storage of the designs, no previous versions are lost. Bergman: “It is important that we can quickly compare multiple options, so that we can always discuss with the customer and offer the best solution. So it’s also great that we can easily view older designs and track why certain changes were made to the project and by whom. ”

> “With the help of the application, a complete design can now be made quickly and easily. This not only saves time, but also money. ” - Anande Bergman CTO of CODURE

## From design to product

CODURE not only makes the designs, but is also responsible for the production of the couplings and their quality control. CODURE has developed special CNC machines for production to be able to make the coupling pieces. The final design is converted in the application into a G-code with which these machines can be controlled. Bergman explains: “Now we no longer have to translate a geometry into the instructions for the machine, now we can produce the desired coupling with the click of a button.” Production is thus greatly simplified and accelerated, and the probability of errors is much smaller.

## Quality control

After the production of a coupling, quality checks must be done. Due to its use in drinking water pipes, CODURE must adhere to strict regulations. Quality control is also supported in this application. Amongst other things, the following information is tracked per coupling piece: which materials have been used, who has worked on it, whether all sizes are correct and whether all quality requirements have been met. “Everything is stored in a well-organised way and it is easy to trace what happened to that specific coupling piece,” says Bergman.

## Advantages of the application

The entire process, from initial design and quotation to actual production and quality control, is thus centralised in one application. This not only saves CODURE a lot of time in designing, calculating, entering and updating everything that is involved in making a coupling piece; but it also ensures that processes are simplified and the risk of errors is reduced. By automating the entire process, CODURE is left with time that they can now use to improve and optimize the product.

Bergman: “It is simple. Anyone can use the application. All the knowledge behind the design, which was previously only in the hands of the specialists, has now been made accessible to the entire organisation. ” So in addition to the centralisation of data and time savings, CODURE can store and always use their knowledge.

small_CODURE.png

thumbnail_CODURE.png

Customer_case_CODURE_FRP_flanges_1

Replacement or renovation of deteriorated pipes is required to provide clean drinking water. CODURE and their partners have now developed a new system that allows for simple renovation!

CODURE: Automated design and production of FRP flanges

## Automation in the offshore sector

While a lot of automation is already taking place in the automotive and aviation sector, the offshore sector is still lagging behind. According to Maas Hoogeveen, Technology Director at Mocean Offshore and developer of Calypso, this is because the offshore industry is a highly conservative market. “Everybody works on their own projects and has their own reasons for sticking to the old principles. But we are working on applications with automated calculations that will reduce the time and money spent on a project.”

### No more manual tasks

In the jack-up industry, there are still many repetitive tasks performed by engineers. This is partially due to the complexity of the frameworks laid down in ISO 19905. However, it is not commercially viable for the experts to fully perform the extensive calculations manually; they have to use conservative shortcuts. Hoogeveen: “We use algorithms and parametric models, so that shortcuts no longer need to be used and calculations can be done faster and more specific.”

>“The best way to share knowledge is by making it available through a web application.” - Maas Hoogeveen

## Looking for the right digital tools

Maas has spoken with many market parties about making his application available online via a web interface. “It would be a costly enterprise to even create a Minimal Viable Product. Then I came into contact with VIKTOR, which was a great fit. The interface was exactly what I envisioned. It meets the wishes of various stakeholders. A sales manager, for instance, may want to use Calypso as a means of communication with which he or she can generate clear images, whereas an engineer may want to perform in-depth calculations and optimize the use of a platform. Calypso’s interface caters to many different users, which is made possible by the versatility of the powerful VIKTOR platform. Another big advantage is that the costs are much lower.”

> “The web application was developed within 40 hours. The iterations that have been done were also implemented quickly. This offers enormous opportunities because time and budget are the bottleneck.”

## What is Calypso?

### Site-specific assessment

Calypso is a tool for performing site-specific assessments on any jack-up platform. This determines whether you can install wind turbines with a light or a heavy platform. The tool can be used even before you start a tender. Maas Hoogeveen explains: “We specialize in analysis of jack-ups. The knowledge and calculation methods contained in Calypso are an implementation of the jack-up engineering standard ISO 19905-1:2016. With this application, every engineer can perform a site-specific assessment (SSA).”

Check out how you can analyze offshore wind turbine installation platforms without being expert with Calypso and VIKTOR:

<div style="padding:56.25% 0 0 0;position:relative;"><iframe src="https://player.vimeo.com/video/584895866?badge=0&amp;autopause=0&amp;player_id=0&amp;app_id=58479" frameborder="0" allow="autoplay; fullscreen; picture-in-picture" allowfullscreen style="position:absolute;top:0;left:0;width:100%;height:100%;" title="Calypso-Tutorial-Jack-up-SSA"></iframe></div><script src="https://player.vimeo.com/api/player.js"></script>

### Automated calculations

In addition, the calculations are automated, but an engineer can still look deep inside the system to check all steps and calculations. “This is what we call the glass box paradigm, as opposed to the black box”, Hoogeveen explains.

### Capitalizing knowledge and skill

The main objective of Calypso is to capitalize upon knowledge and skills regarding jack-up engineering by making these available to the offshore industry. Running it as a VIKTOR application is a great way to achieve this: “VIKTOR matched perfectly with our vision of what the interface should be. The way parameters are set and how the model is directly visualised is how we imagined it,” Hoogeveen explains. The web-based application can be used independently by clients, so they can make calculations on their own data and problems.

![Web-based VIKTOR Calypso application.png](/uploads/Web_based_VIKTOR_Calypso_application_3bdaa727dc.png)

## Fast development is not impossible!

The development of a web interface to an application doesn’t have to take months, it can be realized in just a week. Maas Hoogeveen: “We developed a headless application, containing the algorithms and parametric models. With this basis and the assistance of VIKTOR developers we build the Calypso application in only 40 hours. The extensive possibilities of the VIKTOR platform are inspiring. With their help, Calypso is as accessible and user-friendly as we imagined.”

![Calyps and VIKTOR platform.png](/uploads/Calyps_and_VIKTOR_platform_302aedac81.png)

medium_Analyse offshore wind turbine installation platforms without being an expert - resize.jpg

small_Analyse offshore wind turbine installation platforms without being an expert - resize.jpg

thumbnail_Analyse offshore wind turbine installation platforms without being an expert - resize.jpg

Customer_case_analyse_offshore_wind_turbine_without_being_expert_3

With Calypso you can analyse offshore wind turbine installation platforms without being a jack-up engineering expert!

Everyone can analyse offshore wind turbine installation platforms

## Why Dynamo?

People from different disciplines use all kinds of different software programs. Where structural designers make extensive use of BIM and CAD software, such as Autodesk Revit and AutoCAD, road designers use Autodesk Civil3D and Bentley MX Road. The skilled designers amongst us automate their workflows in these packages using Dynamo: By creating Dynamo scripts, manual actions can be automated in structural design software, which saves designers lots of time.

Dura Vermeer’s engineers and technical modellers are amongst these skilled engineers that are highly acquainted with those software packages and use Dynamo intensively in their design process. Their experience, expertise, and the concept of visual programming enable them to quickly develop models with Dynamo. However, some needs are yet to be covered: The exchange of data and versioning of that data remains challenging.

## Why VIKTOR?

Also, although Dynamo is a very handy tool, it has a learning curve: Often only a specialist knows how it works, making other disciplines dependent on the time and resources of these specialized individuals. That’s where VIKTOR comes into play. VIKTOR is a web application development platform for engineers and has a large variety of digital building blocks (like digital LEGO), such as integrations with structural design software. VIKTOR’s web applications provide a central database with version control on the data and offers an intuitive user interface where other disciplines can easily use encapsulated expert knowledge. This is also known as: Democratization of Knowledge.

But the question remains: How do you leverage Dura Vermeer’s existing expertise in Dynamo and VIKTOR’s distribution and data control? The answer: By building an integration between the two! VIKTOR and Dura Vermeer collaborated and developed a Dynamo-VIKTOR node package: Nodes where data can be fetched and pushed from Dynamo to VIKTOR.

## Single Source of Truth

In Dura Vermeer's current design process, the exchange of parameters between the different disciplines often takes place via mail or quick hand-drawn sketches. However, this is not foolproof and can become increasingly risky when many versions and alterations are made. By developing a VIKTOR web application that automatically integrates with different design software, Dura Vermeer no longer requires manual output exchanges. Of course, active communication between the different professionals is still needed, but less normative.

### Creating Dynamo scripts

The Dynamo-VIKTOR node package consists of several nodes (in Dynamo terms, a node is a visual representation of methods/functions with only input and output). When properly placed, the nodes can perform a task such as establishing a connection between Dynamo and VIKTOR. The following figure shows a representation that makes it possible to acquire the input parameters of an entity from VIKTOR to Dynamo. Other configurations of these nodes can create alternative tasks, such as getting results, getting files and even pushing data to VIKTOR.

![The Dynamo-VIKTOR node package](/uploads/Dynamo_VIKTOR_node_package_3359b129c6.png)

By connecting these strings of nodes to other Dynamo nodes, actions and even designs can be automated using the design software. These series of nodes is called a Dynamo script. Once the script is executed, multiple tasks that can be used in Revit will be performed. Since Dynamo is not only supported in Revit, scripts can also be developed for AutoCAD, Civil 3D, Inventor, etc.

### Using the Dynamo-VIKTOR node package

The video shows the same Dynamo-VIKTOR node package used in both Revit and Civil 3D. The video shows how the cross-section is manipulated using the parameters given in VIKTOR. No external exchange file is necessary, resulting in a live connection between all disciplines (in this case the structural engineer, road designer and structural modeller) which is basically practicing the single source of truth principle.

<div style="padding:56.25% 0 0 0;position:relative;"><iframe src="https://player.vimeo.com/video/584816499?badge=0&amp;autopause=0&amp;player_id=0&amp;app_id=58479" frameborder="0" allow="autoplay; fullscreen; picture-in-picture" allowfullscreen style="position:absolute;top:0;left:0;width:100%;height:100%;" title="DV_Dynamo-VIKTOR_nodes_ViktorUBak_v3(1)"></iframe></div><script src="https://player.vimeo.com/api/player.js"></script>

## Connecting software and knowledge

The collaboration between VIKTOR and Dura Vermeer has made a huge difference regarding the way software is deployed. Not only are software packages connected, but also the knowledge of the professionals. Both parties ended up speaking the same digital language, even though their knowledge backgrounds are so different.

In only one sprint (a two-week development period) the live connection between VIKTOR and the structural design software was explored and finally established. Further development will most likely yield many more functionalities and applications, as all kind of design software can tap into this single source of truth.

## A reusable package for future automation efforts

The Dynamo-VIKTOR node package is a very general utility to exchange data between VIKTOR and Dynamo. It can be linked to any VIKTOR app for which credentials are available and any Dynamo script. That is why this is a digital building block that Dura Vermeer can reuse in their future automation efforts as well. In the long term, VIKTOR can continue to provide digital building blocks that Dura Vermeer can use to realize their vision of becoming the best digital contractor in the Netherlands.

If you are interested or have are any questions or remarks about this development, do not hesitate to contact us at: pmadlener@viktor.ai.


large_Dynamo - Civil 3D.png

medium_Dynamo - Civil 3D.png

small_Dynamo - Civil 3D.png

thumbnail_Dynamo - Civil 3D.png

Customer_case_dynamo_viktor_2

The design and construction of objects requires many disciplines that all use different software programs to come together. By integrating software like Dynamo and Civil 3D with the VITKOR platform, data can easily be exchanged and automatically generated. 

A single source of truth for Dynamo and Civil 3D

## Collecting everything in one place

Roland Snelders has been involved in the development of the concrete slab reinforcement application for Heijmans. “We could read the internal moments from a SCIA file and these were collected in the report, usually in a table. Then those moments could be entered in Excel and the reinforcement was determined and tested in an iterative process. That calculation was therefore copied to the report. ” This way of working could be done more efficiently. It would be easy if copying numbers is no longer necessary, because everything is collected in one place.

### No more copy + paste

That's exactly what the application they created does. Snelders: “From SCIA we can now export an XML file and read it into the application on the VIKTOR platform. The Excel sheet is also linked to this. After selecting the concrete cross-section data and various reinforcement options, I get a picture with colors that indicate where the reinforcement should be.” This ensures that you go directly from the SCIA file with a once-off data entry to a visualisation of the results that come from the Excel sheet, without having to copy anything.

### Centralizing data

The Excel sheet has not been completely transferred into the application, but rather has been linked to it. This has the advantage that it does not have to be recreated, which would then have to be validated. In addition, all manufacturers know how to make a calculation in Excel, you can still continue to do that. “The application ensures that everyone now works with the same Excel sheet, since it can only be opened centrally,” says Snelders. This significantly reduces the risk of errors.

## General use of the application

The application can be used in any construction that contains a slab, for example a floor, a wall, a roof or a bridge. “Initially, only rectangular slabs could be calculated and analysed, which was a major limitation,” says Snelders, “This has now been improved to allow for all types of slab shapes to be calculated.” The application is made by developers of VIKTOR, because Heijmans did not yet have the required knowledge to do it themselves.

![Excel and SCIA connected.png](/uploads/Excel_and_SCIA_connected_c24d123297.png)


## Partial automation for now

This is the beginning in terms of automation. "For the time being it is not going to be possible to calculate entire constructions completely, because there is a lot of variation in every project." Snelders explains, "But it is very useful to have components of that construction automatically calculated." There is less variation in the components themselves, so they can be calculated perfectly with an application. This allows the structural engineer to have more time for the more complex and challenging aspects of his/her work.

## More space left for challenging work

Snelders: “The application makes work more fun. I do not find completing an Excel sheet challenging work. ” When filling in cells and copying data, a structural engineer adds little knowledge to the process. Where they do add knowledge is during the schematisation of the construction and the making of a calculation model, in order to subsequently arrive at an optimal and practical choice of reinforcement. "That work still remains, we have mainly automated the repetitive calculations."

large_Automating the calculation process by linking Excel sheets to SCIA on the VIKTOR platform - actual resize.jpg

medium_Automating the calculation process by linking Excel sheets to SCIA on the VIKTOR platform - actual resize.jpg

small_Automating the calculation process by linking Excel sheets to SCIA on the VIKTOR platform - actual resize.jpg

thumbnail_Automating the calculation process by linking Excel sheets to SCIA on the VIKTOR platform - actual resize.jpg

Customer_case_automating_calculation_process_linking_excel_SCIA_1

In construction, calculations are often done in Excel sheets that need a lot of developing. Because Heijmans has linked these sheets to SCIA on the VIKTOR platform, automating parts of the process.

Automating the calculation process by linking Excel sheets to SCIA

## More time to solve complex problems

Previously, many calculations for fender systems were done with rules of thumb. This is no longer possible, due to the stricter new standards. The calculations now have to be done in more detail, which creates a lot of extra work for the engineers. Calculating all options manually one by one is laborious, so it was decided to automate these calculations. Louis: “The calculation of constructions will be increasingly automated. The time gained from this can then be used to solve complex problems.”

### Computers are taking over repetitive calculating 

Peltenburg explains: “Repetitive elements are very suitable for programming, and so can be calculated using an application.” With repetitive elements, the same calculation must always be performed, something that an application on the computer can do much faster than a structural engineer by hand. “Once the repetition is found in a construction, letting a computer do that calculation allows one to save a lot of time,” says Peltenburg.

## An application for automation

### An interface between REFM and VIKTOR
MH Poly uses the calculation software RFEM to calculate the fender systems. Louis was very interested in creating an application for fender systems and asked Peltenburg to work on this together. The application they created contains an interface between the RFEM software and the VIKTOR platform. Peltenburg: “We offer an API to all our customers, on which applications can be made. This was the first time that it has been taken on in a professional manner.”

### Possibilities in a changing sector

In the fall, the application will be presented on the MSc Engineering customer day. “We want to show our customers that the sector is changing and what possibilities there are in terms of automation.” Peltenburg says. Louis, “This application is a pilot to see how it goes, but it is my intention to collaborate more if everything goes well.” You can still register for the customer day via this link.

“The biggest advantage of using VIKTOR is to initiate a change in thinking amongst engineers. There is still a lot of traditional thinking, which has to change to a way that makes better use of ICT developments in the field of engineering”, says Louis. Peltenburg adds, “The nice thing is that you don’t know what will happen in the future. There are so many options it can be used for:  [artificial intelligence](https://www.viktor.ai/blog/40/artificial-intelligence-machine-learning-engineering-construction), [Parametric Design](https://www.viktor.ai/blog/46/parametric-design-cloud-engineering-construction), Machine Learning.”

![Integrating REFM analysis systems with the VIKTOR platform](https://cms.viktor.ai/uploads/Dlubal_and_VIKTOR_1a12a7cef7.jpg)


*MH Poly is an engineering company that has been using the computational analysis software RFEM from Dlubal for years. This software is provided by MSc Engineering. Emiel Peltenburg is a specialist at MSc Engineering and distributor of the software RFEM and IDEA StatiCa.*

large_The advantages of linking RFEM calculation software to the VIKTOR platform - resize.jpg

medium_The advantages of linking RFEM calculation software to the VIKTOR platform - resize.jpg

small_The advantages of linking RFEM calculation software to the VIKTOR platform - resize.jpg

thumbnail_The advantages of linking RFEM calculation software to the VIKTOR platform - resize.jpg

Customer_case_linking_RFEM_calculation_software_online_platform_2

Advantages of linking RFEM calculation software to an online platform

*This blog entry was written by BESIX*

In this blog, the proposed automation strategy for the ongoing design process of the tunnel and its benefit during the detailed design phase compared to traditional methods will be discussed. The present project forms the first application of [parametric design](https://www.viktor.ai/blog/46/parametric-design-cloud-engineering-construction) and automation of such magnitude being developed in-house at the BESIX Engineering Department. It reflects our ambition to use these techniques for tackling the ever increasing challenges within the construction industry and simultaneously boosting productivity and the quality of the final product.

## Programming for construction engineering
When encumbered by the limitations of existing software packages, engineering tasks can greatly benefit from customized and automated workflows enabled by custom tools. Though not new, the implementation of programming in construction engineering is rapidly rising. The demand grows due to the ever increasing requirements and complexity of construction projects. In parallel the possibilities increase due to growing computation power, improved availability of Application Programming Interfaces (API’s) and to the rise of visual programming environments that are supported by large online communities, such as Grasshopper or Dynamo.

## Parametric design and automation
About two years ago the in-house Engineering Department of BESIX –Belgium’s largest construction firm– started to explore the potential of [parametric design](https://www.viktor.ai/blog/46/parametric-design-cloud-engineering-construction) and automation to enhance engineering activities. 

### Parametric design for a new highway connection

BESIX is part of joint venture De Groene Boog that will design and construct a new highway connection in the North of Rotterdam for Dutch agency Rijkswaterstaat. The project comprises a 2.2 km long tunnel (excluding its entry ramps) of which the BESIX Engineering Department is currently conducting the structural design. Given the fact that repetition is key to ensure a large positive impact (both in terms of efficiency and quality) of any automation strategy, this tunnel design has from the start proven to be an ideal candidate to benefit from automation: it is a linear project with very repetitive geometry described by straightforward logic. In addition, a preliminary and detailed design phase of more than a year was foreseen, creating a risk for various design changes throughout the process that require rework. The project offered a unique opportunity for new developments thanks to this sufficient availability of time and to the high enthusiasm of all involved parties within the consortium for testing novel techniques. It forms the largest application of [parametric design](https://www.viktor.ai/blog/46/parametric-design-cloud-engineering-construction) and automation developed inhouse at our engineering department so far.

The scope of automation for the tunnel design at BESIX comprises three parts:

1. the construction of a 3D Building Information Model (BIM);
2. the extraction of 2D technical drawings from this model;
3. structural calculations of the piles and tunnel section.

## A parametric information model

For purposes of coordination, visualization and communication a Building Information Model (BIM) of the tunnel’s structure needed to be created. This model is in a later phase used as the single source for the extraction of technical drawings.

To benefit from the high degree of repetition, we decided to create the model through a series of custom programmes or scripts built upon and interconnecting multiple existing software applications. The model is composed of [parametric objects](https://www.viktor.ai/blog/46/parametric-design-cloud-engineering-construction) of which the parameters easily allow their geometry to adapt to the variations present in the tunnel. The scripts automatically place and update these objects together with their parameters and other information. The location of each object is computed from the central road axis (see picture below), which is delivered by an external party. Consequently, a change in road axis can swiftly be propagated to the entire BIM.

![Three steps in the automated creation of the BIM](/uploads/Three_steps_in_the_automated_creation_of_the_BIM_57af2b2ec8.png)

*Three steps in the automated creation of the BIM: external input, i.e. the road axis and top surfaces with cross fall (top); main lines of the linear geometry (middle); view from the resulting structural model (bottom); screenshots from Dynamo and Revit.*

### Spreadsheets

The key parameters that together with the road axis drive the geometry of the model are gathered and managed using a set of spreadsheets. These spreadsheets offer the advantages of ease of use and centralization. They simultaneously serve as the interface between the multiple software packages –each selected for its specific strengths– comprising the automation workflow. From this information, each corner of the linear structural components of the tunnel could accurately be computed. The resulting coordinates are stored into a new spreadsheet that forms the basis upon which the entire model is further constructed. Subsequent tools stepwise populate these numerous coordinates with the parametric objects of walls, floors, piles etc. Due to the vast number of coordinates and objects, the custom developed scripts are no longer merely handy, but become indispensable to ensure that this process can be done in an efficient and accurate manner. The entire workflow is illustrated at the end of the blog.

### A custom tool

It is important to note that various specialized commercial software packages exist for the modelling of linear infrastructure projects based on one or more road axes and a [parametric](https://www.viktor.ai/blog/46/parametric-design-cloud-engineering-construction) road or tunnel profile. The coordinates of each corner of each linear structural component can furthermore easily be extracted from these models. The development of a custom tool for this purpose was nevertheless necessitated by the specific segmented tunnel geometry of the present project. The existing software typically creates geometry by sweeping a vertical profile along the road axis. Hence horizontal dimensions are measured normal to the road axis. In contrast, the present project consists of 25m long tunnel segments comprising straight walls, where horizontal dimensions should be measured perpendicular to the walls. A mismatch hence exists at places where the road alignment is bent. Though the difference might be small and mostly fall within construction tolerances, for the detailed design phase (with a minimum requirement of LOD300) we have nevertheless chosen to create a model that accurately corresponds to the design.

## Designing the tunnel

### Workflow automation

Developing the automation workflow for the creation of the [parametric](https://www.viktor.ai/blog/46/parametric-design-cloud-engineering-construction) BIM of the tunnel has proven to be a time-consuming act. Multiple iterations of trial and error were required to find a workflow that offers sufficient flexibility to include all design variations throughout the process from model setup to drawing production. Consequently, an initial manual creation of the model within the existing software applications will probably have been faster. Nevertheless, multiple design changes have already taken place throughout the design process that likely have shifted the balance. The lessons learnt will additionally lead to faster developments on future linear construction projects.

### Accuracy, less errors, and flexibility

Apart from time spent or won, the custom workflow improves accuracy and reduces risk of errors during manual actions. Most importantly is the gain in flexibility. Indeed, even a drastic change such as altering the road axis can now be quite efficiently dealt with by rerunning the various scripts. Nevertheless, the adaptability enabled by the developed tools is not infinite, but confined to a predefined design scope. It is important to consider which design changes should be allowed and included at the start of the modelling process, as changes surpassing the foreseen logic are more difficult to incorporate. The reality of a design project of this magnitude has unfortunately proven that this foresight is not always possible, making some rework inevitable.

### Automated drawings

From the information model over 2000 of similar, yet not quite identical 2D drawings need to be extracted. This equals one unique set of drawings for each of the 89 tunnel segments. Automation is imperative to ensure an efficient production process and should furthermore ease the handling of late design changes.

Modern BIM tools greatly facilitate the extraction of drawings from a 3D model. The drawings are views from the 3D model, meaning that a change in the model is directly reflected in any related drawing. Nevertheless, setting up these drawings requires numerous manual actions. The average drawing sheet can easily take up to 8 hours for an experienced draftsman to complete. We have therefore opted to first create a single unique set of drawings of the tunnel to be approved within the project team, which would then serve as an example to be replicated as well as possible through automated procedures.

Our previous experiences have shown that due to repetitive work connected to drawing production greatly gains in time, standardization and accuracy can be made using custom tools with a short development time, reducing a draftsman’s work from an average of 8 hours to 1 hour per drawing sheet. Our goal for the present project is to further minimize the manual post-processing needed by draftsmen and to entirely eliminate this need for 80% of the drawings.

In a first step we automatically produce and manage the creation of drawing sheets and title blocks from a spreadsheet. The spreadsheet containing all drawing sheet information that is needed as input for this automated production is in general readily available for planning purposes. It can hence be efficiently reused for the actual creation of the drawing sheets. During the process, non-textual information can be added to the drawing sheets as well, e.g. QR codes providing a link to the online data management system.

#### Views and scripts

Once the drawing sheets have been prepared, views are created in the model and arranged on the drawing sheets. This process is straightforward to automate when the arrangement has been well considered in advance. Creating scripts to add dimensions to the 2D drawings has in contrast proven to be elaborate. In search for a generic approach to place context-specific annotation, we have opted to add coded markers to the [parametric model](https://www.viktor.ai/blog/46/parametric-design-cloud-engineering-construction) objects (inspired by the work of jointventure-partner Mobilis on project RijnlandRoute). Instead of directly dimensioning the objects, their markers are dimensioned, where each marker represents one point in space. The form of annotation is managed in the marker codes, which group points to be added to the same dimension line and define this line’s orientation and relative position. For example markers with a similar code for property X will be added to a linear dimension line for all views oriented along direction Y. Annotation can hence be managed and customized within the modelling environment instead of the scripting environment. Since we have more modellers available than programmers, this is a beneficial feature.

### Promising tests

Though the actual results are due later this year and the drawing automation workflow is still under development, first tests are promising. Numerous drawing sheets and views can be produced in no time and in a highly standardized manner. Full automation has not yet been reached for any drawing set, where particularly the post-processing of annotation remains crucial. We will continue extending the automated actions where the BIM application’s API makes it possible and the potential time gain versus the required development time of the scripts makes it sensible to do so. For indeed, full automation of all drawings will surely not be useful as most unique technical details will simply be more efficient to produce manually using the standard toolset provided by the BIM application.

## Design automation

The present project equally entails repetitive work for the structural design of the tunnel that could be improved through automation. Several small tools are developed in-house to facilitate geotechnical analysis of the foundation and sheet piles. For the design of the reinforced concrete tunnel structure a tool has been developed together with an external partner on a Cloud-based platform (VIKTOR).

### Geotechnical design

Over 6000 foundation piles and 4000 sheet piles are to be designed for the tunnel. First, hundreds of CPT measurements need to be interpreted and matched to the piles for calculation. A spreadsheet has been set up for a custom interpretation of the CPT measurements and a VBA routine to run this process in batch.

For the calculation of the piles, the tools typically used in the Dutch market are straightforward to use, though they do not allow to create [parametric calculation models](https://www.viktor.ai/blog/46/parametric-design-cloud-engineering-construction). To avoid the need to manually change the model input for each unique set of soil and loading conditions along the tunnel, we created another spreadsheet to mimic parametric behaviour. The desired parameters of each individual calculation model are assembled in a single spreadsheet. As the calculation model can be easily read and edited through a text editor, we then use string manipulation to edit the textual contents of the model and create a unique calculation model for each unique set of parameters. These are in a following step computed in batch and the results automatically gathered – again in a spreadsheet– for post-processing.

### Structural design

For the structural design of the concrete floors, walls and roofs, we have collaborated with an external partner from the Netherlands, VIKTOR. Together we have developed a tailored design tool on their cloud-based platform by combining our engineering expertise with their development skills. This tool in a first step assists in setting up the structural models along the entire length of the tunnel for two different structural analysis software packages: a first to compute the internal forces of the tunnel sections and a second to design the structural reinforcement. The models are defined [parametrically](https://www.viktor.ai/blog/46/parametric-design-cloud-engineering-construction) to easily set and change the design, while varying loads due to a variable tunnel depth are automatically introduced. The tool subsequently enables batch calculating all models and, most interestingly, afterwards gathers the results from both structural analysis packages and overlays them in a single visual representation (Figure 2). Aside from simply reducing the manual work, the tool hence processes and presents information in new manners providing swift insight for better-informed design decisions.

### Quicker calculations

To assist the geotechnical design, several small tools have been developed in-house based on spreadsheets. These tools are a typical example of a short development time combined with rapid results and great time savings. Of course spreadsheets have long been widely used in engineering. It is important to be aware of their added strength once they are connected to external files and applications.

For the design of the tunnel’s reinforced concrete structure, the developed Cloud-based VIKTOR application drastically speeds up the calculation process and thus allows a change in design approach. Where one would traditionally calculate only a handful of representative tunnel sections, this tool allows calculating hundreds within the same time frame. The tool is hence beneficial to achieve higher precision results and improved insight, which enable fine-tuning the design and reducing material costs.

![design and production automation a16 tunnel rotterdam.png](/uploads/design_and_production_automation_a16_tunnel_rotterdam_36c4f26735.png)
*Visual output of the custom application based on the Viktor platform: single cross-section with bending moments (blue and red) and unity checks (yellow/green lines) (top figure); contour plot visualizing the unity check of the floor along the entire tunnel (results for 8 different segments are shown; bottom figure).*

## Technical or organizational challenge?

Due to its straightforward, repetitive geometry and its scale, the presented tunnel project offered various opportunities to develop customized tools for automation. Simple and accessible tools such as spreadsheets often play an important role, particularly as interface between existing software applications for an improved interoperability. The interactions between the individual workflows and tools could be further improved (e.g. by using the same centrally-stored geometric parameters for all applications; flowchart below). The variety of actors, information requirements, responsibilities and schedules however make this an organizational challenge rather than a technical challenge.

![Flowchart of the automation workflows](/uploads/Flowchart_of_the_automation_workflows_01f11c97e3.png)
*Flowchart of the automation workflows discussed in the present paper. The road axis is input shared by all workflows. Other input parameters -such as dimensions of the tunnel geometry- are of course equally shared, though they are entered in different formats and at different locations due to the varying information requirements. The dynamic links between the workflows should be improved in future projects.*

## Deciding automation

Developing the automated setup of the information model has taken longer than expected, largely due to the incorporation of exceptions on the overall geometrical logic. It should hence always be carefully considered whether these exceptions should be automated in the first place. Once the effort has been made, a huge flexibility for coping with design changes is nevertheless obtained. The various developments for drawing production and geotechnical calculations moreover demonstrated the potential of small tools to have a large profitable effect on time, effort, accuracy and standardisation.

Our enthusiasm about the added value of [parametric design and automation](https://www.viktor.ai/blog/46/parametric-design-cloud-engineering-construction) is high and likewise are our ambitions for the present project. Multiple developments are still ongoing and several tools still need to be tested. Their true added value remains to be evaluated to maximally benefit from the present developments in future projects.

See how you can apply [parametric design solutions](https://www.viktor.ai/parametric-design-software) to your projects too. 

### References

“Parametrisch ontwerpen,” Cement: vakblak over betonconstructies, vol. 70, no. 6, pp 4-55, 2018.
Level Of Development (LOD) Specification Part I & Commentary, BIM Forum, 2019, available on https://bimforum.org/lod/

K. Roovers and F. Snoeck, “Parametric Design and Automation for Contracting,” in Proceedings of the IASS Symposium 2018, C. Mueller and S. Adriaenssens, Eds. Boston: MIT, 2018.

Bron: 2019 IABSE congress New York City


large_Design and product automation for the A16 tunnel in Rotterdam.jpg

medium_Design and product automation for the A16 tunnel in Rotterdam.jpg

small_Design and product automation for the A16 tunnel in Rotterdam.jpg

thumbnail_Design and product automation for the A16 tunnel in Rotterdam.jpg

Customer_case_a16_tunnel_rotterdam_4

Digital models were set up parametrically to produce a numerous drawings detailed 3D model of the A16 tunnel in Rotterdam, and effectively cope with possible design changes.

Parametric design and product automation for Rotterdam's A16 tunnel

The problem with the gravity based foundation (at BAM) was that it was determined or calculated using a number of separate Excel sheets. Among other things, investigation was done on the stability during floating and sinking, the natural frequencies and the strength of the design. You can imagine that this was not done very efficiently.

## The issue of centralization

All members of the project team were working on the same design, but each within their own discipline. So everyone used their own sheets. This caused problems, because if someone changed the input parameters, each team member had to be notified, which would result in everyone updating their own sheets. Making a complete design and calculating all sheets properly therefore took 5 to 10 days. There was this idea that it could be done better, so a tool has been developed to be able to perform these analyses at the same time.

## Bringing it together

For this, all calculations made in Excel have been transferred to an application on the VIKTOR platform. The calculations have been translated into Python code, so some methods had to be changed. The end results have of course remained the same. The advantage of the VIKTOR platform compared to only Python code is the interface (where the input and output parameters are centrally controlled), data management and version control.

This ensures that everyone works with the same input parameters at the same time, without having to manually pass on and adjust them. Everyone is also working on the same version of the design, so no miscommunications or misunderstandings can arise. This is something that can easily happen with separate Excel sheets: several different versions can easily be made.

## More designs, faster!

An analysis now takes a few hours instead of a few days. That is a huge difference, which makes it possible to design faster and make more designs with the same people. A number of designs have already been made, so a new design similar to this is relatively quick. If you make a completely new or large design, it will take a little longer. But is is certainly much quicker to use the application than by the old methods.

This application is made specifically for BAM. It is entirely based on internal documents and tools of BAM. Copying this application to another company is therefore not easy.

![Analysis of gravity-based foundations on the VIKTOR web application](/uploads/gravity_based_foundation_application_59047b4c08.png)

*Analyses of gravity-based foundations in on the VIKTOR web application*

## A building block for future use

What can be re-used is the method used to create the application. Combining different disciplines is a (generic) process, which can be a useful tool for almost all companies. Having separate programs for different parts of a design creates far more misunderstandings than having all data centralized.

## Thus...

In other words, the application for the gravity based foundation ensures that all data is centrally stored and that everyone works with the same version of the design. For example, there are no misunderstandings due to changes in Excel sheets. It is now also easier to make a design together, since the inputs are centrally controlled and everything is done using the same input, so the calculations are more central and clear. “You go from a design in 5 days to a design in 4 hours.”

large_gravity-based foundation application.jpg

medium_gravity-based foundation application.jpg

small_gravity-based foundation application.jpg

thumbnail_gravity-based foundation application.jpg

Customer_case_centralizing_data_faster_gravity_based_foundation_analysis_2

BAM: “From 5 days to 4 hours”, huge time savings with the gravity based foundation application made with VIKTOR!

Centralizing data for faster gravity-based foundation analysis

> "Working more efficiently to make more time for smart solutions” - Heijmans

## Generic applications

Bart Vosslamber is an engineer at Heijmans and explains, “We have now made two applications. One [parametrically](https://www.viktor.ai/blog/46/parametric-design-cloud-engineering-construction) calculates the pile bearing capacity for different CPTs, and the other calculates the required concrete cross sections (with reinforcing bars) under different loads.” The advantage of the applications is that they can be used in any project, despite the fact that every construction project is unique.

## Recurring elements

No project is the same, but every project contains elements that often recur. Heijmans made applications precisely for those elements, so that these calculations no longer have to be done manually. Vosslamber: “We are convinced that the future lies in parameterization. You need building blocks that can [solve the parametric issues](https://www.viktor.ai/parametric-design-software). ” The applications are two of such building blocks. They make the process more efficient.

> “We opted for an application about pile bearing capacity, because there are foundation piles in every project. And concrete cross sections must also be reinforced in every project. ” - Bart Vosslamber, engineer at Heijmans

## Anticipating changes

The applications make changes more efficient, for example, and reports are easier to adjust. “Suppose something changes in the design, then all calculations have to be done again,” says Vosslamber. “The application allows you to redo those calculations with the push of a button.” This saves a lot of time, which leads to new ideas and the number of useful tools can increase.

## More apps to come

There are now two applications and the goal is to expand that number. This expansion can be done in two ways, says Vosslamber, “We can now calculate a rectangular slab of concrete, which can be expanded to round sections. In addition, there are even more interesting applications for the future, for example for steel cross sections or load combinations. ” These expansions are also already planned at Heijmans.

## Development with VIKTOR

The applications are made on the VIKTOR platform. Heijmans developed the applications themselves, where they first had training on how to do that. “We have chosen to do it ourselves, because we have the substantive knowledge about structures. When you work with it you are better able to specify what kind of tool you actually want. If I want this as a result, I have to ask it that way", explains Vosslamber.

Using VIKTOR to develop the applications went well. “At VIKTOR they are committed and they answer your questions quickly,” says Vosslamber.

![Heijmans generic application.png](/uploads/Heijmans_generic_application_f80ca27a6b.png)

At Heijmans, they are happy with what the applications can do for them. Vosslamber, “With every construction we come up with, we have to provide a report to substantiate why the construction we have made is strong enough.” The application helps them to draw up that report easily, so that their clients can clearly see how, for example, a cross-section has been made and which calculations are involved.

## Automation and parametrization

Heijmans would like to smarten up and focus on automation and parametrization. The two applications that have now been created are the beginning and more are already planned. Vosslamber, “With these applications we can work more efficiently in every project and we can invest more energy in smart solutions, which is very beneficial for both us and our customers.”

large_Hejimans develops generic applications that can be used in many different projects - resuze.jpg

medium_Hejimans develops generic applications that can be used in many different projects - resuze.jpg

small_Hejimans develops generic applications that can be used in many different projects - resuze.jpg

thumbnail_Hejimans develops generic applications that can be used in many different projects - resuze.jpg

Customer_case_Heijmans_develops_generic_applications_different_projects_1

Heijmans has been working on the development of generic parametric design applications that can be used to automate and optimize processes in many different projects. Read more about it here!

Customer cases

Hydraulic engineering meets digital innovation at Van den Herik

Customer cases

Hydraulic engineering meets digital innovation at Van den Herik

Blog

White Papers & Guides